This is a re-release of the famous and classic Martini liveried Alfa Romeo 155 V6 TI (originally released on the TA-03F chassis). The actual car took part in the International Touring Car Series (ITC) in 1995 and 1996. The ITC was a series contested by the triumvirate of Mercedes-Benz, Alfa Romeo and Opel, and the Martini-sponsored Alfa of Alessandro Nannini and Nicola Larini contributed to Alfa Romeos second place in the 1996 Manufacturers Championship standings, Nannini also securing third in the Drivers points race. Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-02 entry level touring car chassis. The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance.

- Chassis: TT-02 ABS resin bathtub type minimizes contact with the road upright assembly can be changed to give chassis an extra 4mm of travel for Rally racing
- Drive: Four wheel, shaft driven, with dogbones
- Motor: Tamiya Torque Tuned 540 brushed with aluminum heat sink
- Electronic Speed Control: Tamiya TBLE02S brushless compatible
- Differential: Gear type
- Wheels: Nylon construction, gray in color 12mm hex, 1.02" (26mm) wide 2.00" (51mm) diameter
- Tires: Slick rubber with foam inserts
- Suspension: Fully independent double wishbone
- Shocks: Plastic body, friction, not oil filled
- Body: Clear polycarbonate
- Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Steering: Bellcrank type
- Bumper: Front, urethane
- The Classic Body Of The Alfa Romeo 155 V6 TI Is Accurately Recreated In Durable And Lightweight Polycarbonate
- 4WD Double Wishbone Independent Suspension System Employs Center Shaft To Connect The Front And Rear Gear Boxes
- The Beginner-Friendly Yet Highly Adaptable TT-02 Is A Versatile And Easy-To-Maintain Chassis
- Stickers Are Included To Recreate The Distinctive Livery Of The Car
- Comes With Window Masking Stickers For Use When Painting The Body
- Over 40 Hop-Up-Options Are Available To Tune The Chassis To Your Skill Level
- Includes Torque Tuned Motor
- Tamiya Alfa Romeo 155V6 TI Martini with 540 Brushed Motor, Tires, Wheels, Clear Body, Foam Inserts, ESC, Decals and Instructions
- Radio system (transmitter and receiver)
- Steering servo
- 7.2-7.4 volt battery pack & compatible charger
- Tamiya PS paint
- Adjustable Gear Ratio: Yes
- Bearings: Plastic Bushing
- Body Material: Polycarbonate
- Chassis Material: Plastic
- Construction Type: Assembly Kit
- Differential Type: Gear
- Drive Type: Gearbox
- Led Light Buckets: No
- Led Lights: No
- Motor: 540-Brushed Type
- Scale: 1/10
- Shock Damper: Friction Damper
- Suspension: Fully Independent Double Wishbone
- Terrain Use: On-Road

description revised by: SN August 5, 2019