Peak Performance PEK00568
$29.64
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Powermax 4200mh LiPo 7.4v (Tamiya Plug) 45c
This is the Peak Racing 7.4V 4200mAh 45C Stick LiPo Battery with Tamiya Connector.
- Protective ABS case has the same dimensions as a six cell 7.2 stick pack
- Wired for balancing with JST XH (ElectriFly Style) balance plug
- LiPo charger and balancer such as the Onyx 235 AC/DC Charger
- LiPo charging bag
- Number of Cells in Series: 2
- Rated Voltage: 7.4V
- Continuous Discharge Rate: 45C
- Weight: 7.4oz (210g)
- Length (case): 140mm
- Length (w/ wires bent over): 150mm
- width: 45mm
- height: 25mm
- ALWAYS use a LiPo Cell Balancer
- NEVER Charge over 4.2V per cell
- NEVER Charge at currents greater than 1C
- NEVER Charge through the "To ESC or "DISCHARGE" lead
- NEVER Trickle Charge
- NEVER allow to Discharge below 2.5V per cell
- NEVER disassemble or modify pack wiring in any way or puncture cells
- NEVER place on combustible materials or leave unattended during charging
- ALWAYS Charge in a fireproof location
- ALWAYS set charger's output volts to match battery volts
- ALWAYS keep out of reach of children
description revised by: SN January 14, 2021
FEATURES:
- Designed for cars, trucks and buggies requiring a stick pack configuration- Protective ABS case has the same dimensions as a six cell 7.2 stick pack
- Wired for balancing with JST XH (ElectriFly Style) balance plug
YOU WILL RECEIVE:
- Peak Racing 7.4V Stick LiPo Battery with Tamiya ConnectorREQUIREMENTS:
- 2S XH Plug Adapter- LiPo charger and balancer such as the Onyx 235 AC/DC Charger
- LiPo charging bag
SPECIFICATIONS:
- Capacity: 4200mAh- Number of Cells in Series: 2
- Rated Voltage: 7.4V
- Continuous Discharge Rate: 45C
- Weight: 7.4oz (210g)
- Length (case): 140mm
- Length (w/ wires bent over): 150mm
- width: 45mm
- height: 25mm
COMMENTS:
- ALWAYS use a LiPo-approved Charger- ALWAYS use a LiPo Cell Balancer
- NEVER Charge over 4.2V per cell
- NEVER Charge at currents greater than 1C
- NEVER Charge through the "To ESC or "DISCHARGE" lead
- NEVER Trickle Charge
- NEVER allow to Discharge below 2.5V per cell
- NEVER disassemble or modify pack wiring in any way or puncture cells
- NEVER place on combustible materials or leave unattended during charging
- ALWAYS Charge in a fireproof location
- ALWAYS set charger's output volts to match battery volts
- ALWAYS keep out of reach of children
description revised by: SN January 14, 2021
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov